PDA

View Full Version : Man with drill needs help...



Martyn27_uk
27-07-2005, 12:17 PM
Does anybody have detailed instructions ( workshop manual extract or technical service bulletin ) regarding the hole driling required to fit a new design water pump into the old shell?

ctrlaltdelboy
27-07-2005, 09:45 PM
once you have your new pump in place, just offer up your cover in the correct position and the drain pipe will touch the cover in the place where you need to make a hole for it to go through - if you slap a blob of grease or something onto the pipe then it will show you where to drill, select a suitable sized drill bit and you should be pretty much there.

710
01-08-2005, 11:29 AM
Don't know if it will help, but see my post, about halfway down.
http://nsxcb.co.uk/forum/viewtopic.php?t=356&highlight=water+pump