PDA

View Full Version : wanted stock wheels for 1997>



nsx guy
01-07-2008, 11:58 PM
i need 2 wheels for my car,

1 front 16" and 1 rear 17"..

they are the 1997 onwards wheels...(7 spoke)

thanks

Senninha
02-07-2008, 08:38 PM
Could be hard to find as many early owners have upgraded to these leaving a short supply.

You might try Dirk in the vendor section as he has a large stock of most parts

HTH, Paul

Lankstarr
03-07-2008, 09:16 PM
There are some on Prime and you;d pay hefty shippingcosts... but probab;ly sto;;; cheaper than buying over here.

L*

Sudesh
09-07-2008, 08:58 PM
Not sure if they still have any left, but Cleave Motor Salvage had one front and one rear about 2/3months ago.

goldnsx
10-07-2008, 05:52 PM
There is one on ebay.com but be prepared to pay $600 or so, yes, for one wheel.

nsx guy
12-07-2008, 08:47 PM
Not sure if they still have any left, but Cleave Motor Salvage had one front and one rear about 2/3months ago.


these are the two i bought....

i found i rear 1 on nsx prime for $300, and £65 to get it over here...

i was looking for some here in the UK...