parts help

[amo]

ok need a little help pls
best place to get these parts
will go oversea anywhere if needed to pick them up

Wossner custom built forged pistons
Honda gasket set heads
Honda block gasket set
Honda crank shaft bearings x8
Honda thrust washer set
Honda big end bearings x12
Honda water pump
Toda racing cambelt
Honda oil pump

nowt wrong with my engine as im lookin for more power and will be throwing nos in to the mix with a 90mm tb as well lol
as im runnin 400 now so will be happy with 600

all coments welcome good or bad lol

thx amo

oohhhhh the power

[NSXGB]

I think VTEC Direct can help you with just about everything on your list, although not sure about the pistons.

[jaytip]

ok need a little help pls
best place to get these parts
will go oversea anywhere if needed to pick them up

Wossner custom built forged pistons
Honda gasket set heads
Honda block gasket set
Honda crank shaft bearings x8
Honda thrust washer set
Honda big end bearings x12
Honda water pump
Toda racing cambelt
Honda oil pump

nowt wrong with my engine as im lookin for more power and will be throwing nos in to the mix with a 90mm tb as well lol
as im runnin 400 now so will be happy with 600

all coments welcome good or bad lol

thx amo

oohhhhh the power
Amo,how would replacing stock Honda parts with stock Honda parts help with improving BHP?????

[bazza]

Replied to your PM Amo..
Wossner pistons are not listed for the NSX by the UK site.. Im looking into it..

We sell the Jun 90mm and 90.5mm pistons for the NSX if that's any use?
Any reason you wanted to go Wossner?

[NSXGB]

Amo,how would replacing stock Honda parts with stock Honda parts help with improving BHP?????

...I would hazzard a guess that it's all down to the pistons? I would think that they are LC pistons that will allow Amo to run higher boost....

[amo]

well got the price and list from tdi and the pistons will be a custom build
thx bazza got ur pm
might go to the usa will have to see
may be ill change the headgasket to a steel one or 1 from sos
thx amo

[AR]

You greedy man LOL!

[NSXGB]

well got the price and list from tdi and the pistons will be a custom build
thx bazza got ur pm
might go to the usa will have to see
may be ill change the headgasket to a steel one or 1 from sos
thx amo


Would think copper head gaskets would be the way to go?....Not sure what the OEM NSX head bolts are either, but you might need anti stretch ones....

[amo]

will go for apr bolts to hold everything

just thinking where is the best place to go
japan or usa

thx amo

[AR]

I think that Japan would be more of an Epic journey, but the US will be easier to deal with people.

Cheers,

AR

[Kevin]

I don't see why there's a need to go anywhere for these bits. The majority are Honda parts anyway. Cometic make a MLS gasket, and SoS do pistons.

All this stuff can be shipped from the states, and it wouldn't even be a big box.

What you haven't listed are some sleeves.

[TheSebringOne]

Amo, more power, more power please! :D

Is it possible to get nearly 600 BHP with those parts! :eek: Theres SOS own project car which has 600 bhp, have you checked it out?

[amo]

hi guys
ok reason for maybe going to usa will be £-$ rate
so all the stuff will be half priceish

sleave not got 1 in mind
anyone recommend a set up cos im thinking going for 3.2 or 3.4

thx amo

[NSXGB]

hi guys
ok reason for maybe going to usa will be £-$ rate
so all the stuff will be half priceish

sleave not got 1 in mind
anyone recommend a set up cos im thinking going for 3.2 or 3.4

thx amo

I would speak with SOS, they seem to have the experience and the parts you require.