NSX Supercharged

[Kevin]

Seems like Amo's car has turned up at TDI Tuning to have a supercharger fitted. Just mentioning it here as he said he was taking it to Hyeline. Guess they can't do it, if they've sent it on.

http://www.wheels-inmotion.co.uk/forum/index.php?showtopic=1013&st (http://www.wheels-inmotion.co.uk/forum/index.php?showtopic=1013&st)


TDI are running a blog on it. You need to register there to see the pics, pain in the ass website, why can't they let you see pics without registering like I do?

[simonprelude]

Nice, wonder how long it'll take.

[AR]

As I said to Amo is all in the tuning and NSX engines are not cheap! At least TDI have experience on the NSX. I talked top them in the past and they wanted £ 8,000.00 for a Comptech SC.

The question is how big of a TDI sticker they will put on it! :)

I have since resign myself to NA.

Cheers,

AR

[amo]

well well well cant keep anything from u lot

lol
lol
there goes my suprise

ok there was not a prob with hyline doin it as i have been down london going out every night lol

my mate twisted my arm and they owed him a favour so he called it in between us so shhhh

ok the other thing is the 750 cc injectors do not fit as the are about 3 mil bigger
so wot do i do

thx amo

[AR]

Amo,

This website might provide some info why some people are reluctant to use the BBSC:

http://botchedboost.com/home

Cheers,

AR

[amo]

hi mate ya been on the web site looked at loads of sites and they all come back to tunnin
it

so will see as long its done right should be fine

thx amo

[TheQuietOne]

Amo you are very brave fitting one of those after reading that site! Either that or you have botomless pockets of money to source a new engine if it goes pop!

Good luck all the same...

[amo]

i wish i had pockets like that but no brave it is only going to run 7lb for now then may be a year move up to 11lb then the 14lb

was spose to be suprise at japfeast lol

but hay

thx amo

[Senninha]

i is only going to run 7lb for now then may be a year move up to 11lb then the 14lb

was spose to be suprise at japfeast lol

thx amo
Hi Amo,

I think your NSX will deliver a surprise regardless of whether this 'secret' is out :) I'm looking forward to seeing this beasty for sure!

So what does 7lb of boost give you in performance terms? Not so much the BHP figure (even tho I'm curious), more acceleration figures.

Good luck with the project.

regards, Paul

[simonprelude]

Amo

It's a shame that the S/C couldn't have been fitted a few weeks ago, one of the best F/I tuners has just been over from the states doing some work.

However I am sure he will be back in a few months so can check over the tune and see if any 'safe' improvements can be made to extract some more ponies.

I'll let you know.

[Minch]

Simon,

Who is this mysterious tuner from the states? What work has he been doing?

Cheers
Nathan

[amo]

hi here is a dino sheet on devlin's nsx with the simliler mods as mine

thx amo

ps who is the tuner may be we should have a meet when he's back

thx amo

[Minch]

Amo, that is one hell of an impressive power gain! What are you expecting on the combined MPG? Or do you not really give a $hit?

My friends Supra is knocking out 550bhp and although he loves the power he is a little jealous that I don't have to stop in the services when we go out for a run for fuel!

[simonprelude]

Mase

He has just done 4 S2000's on his recent trip along with a few other F/I and N/A Hondas.

www.masetuning.com

Here are a few of the videos

http://www.youtube.com/watch?v=kvEMOVTrvOQ

http://www.youtube.com/watch?v=fbD99Gi16uY&mode=related&search=

http://www.youtube.com/watch?v=SlTdgnYJmpg&mode=related&search=


Simon,

Who is this mysterious tuner from the states? What work has he been doing?

Cheers
Nathan

[amo]

lol thx yep i dont give a **** cant worry about fuel i spend all my money on me car lol

and not finished yet

may be a year then 14lb pulley lol lol

thx amo

[SpaceMonkey]

Mase

He has just done 4 S2000's on his recent trip along with a few other F/I and N/A Hondas.

www.masetuning.com (http://www.masetuning.com)

Here are a few of the videos

http://www.youtube.com/watch?v=kvEMOVTrvOQ

http://www.youtube.com/watch?v=fbD99Gi16uY&mode=related&search=

http://www.youtube.com/watch?v=SlTdgnYJmpg&mode=related&search=

I wish I'd of known this was going on, I'd of popped down to annoy Charlie & watch some runs in the metal.

[Rob_Fenn]

That will be cool...first UK supercharged NSX?

Any reason why you didn't go for TBs? TDI are an official Toda retailer aren't they?

[simonprelude]

Second, I've heard of one other in North Wales.


That will be cool...first UK supercharged NSX?

Any reason why you didn't go for TBs? TDI are an official Toda retailer aren't they?

[amo]

well TB can only go for so much and its like 5k, so more power with the supercharger

so is the other sc nsx comin to jfeast any1 know him

thx amo

[amo]

more pics lol

thx amo

[Minch]

Looks impressive so far! Keep us all updated with the progress.

[NSXGOD]

Looks nice from here :mrgreen:

at least with the intercooler it will not blow up too soon.

some un asked for advice:


Mind the final intake air temp, and get it under 160F
tune the A/F from the exhaust gas temp measured at the header flange
the 750's are way too big unless you are looking to end up at 600HP.
JMO, it's your motor..... ;)

[amo]

a few more pic so far

[amo]

Looks nice from here :mrgreen:

at least with the intercooler it will not blow up too soon.

some un asked for advice:


Mind the final intake air temp, and get it under 160F
tune the A/F from the exhaust gas temp measured at the header flange
the 750's are way too big unless you are looking to end up at 600HP.
JMO, it's your motor..... ;)

at the moment im stickin with the standard injectors and fuel pump

they looked at the paper work from the black turbo one they done and was on standard pump over 500bhp so i think ill be ok on 7lb pulley until i want more ...

a little prob has appered looks like a few more hours as they cant get the oil pipes on the sump as they cant take it off cos the zorst it a single pice one so off comes the diffuser and the whole zorst lol

but has to be done

thx amo

[NSXGOD]

at the moment im stickin with the standard injectors and fuel pump
STOP RIGHT THERE- THE "STANDARD" (IE oem) FUEL PUMP IS CRAP FOR FI AND YOU WILL BLOW UP THE MOTOR RIGHT AWAY - maybe on the first dyno run.


they looked at the paper work from the black turbo one they done and was on standard pump over 500bhp so i think ill be ok on 7lb pulley until i want more ...

A Tubo is not an SC - the standard oem injectors will not make more than 375ISH and they will not do that without 90PSI fuel pressure and will be running at 101% (or lots of expensive black boxes)

The "7psi pulley" will be ~ 6PSI net after it pushes the air through the intercooler.


a little prob has appered looks like a few more hours as they cant get the oil pipes on the sump as they cant take it off cos the zorst it a single pice one so off comes the diffuser and the whole zorst lol
but has to be done
thx amo
look before you leap - this kit was not renamed the "BIG BANG" for nothing.

[amo]

so the option is tank off and a bigger pump in
or
is there another option

thx amo

[NSXGOD]

so the option is tank off and a bigger pump in
or
is there another option

thx amo
Comptech used to use the "boost-a-pump" device to avoid the R&R of the fuel tank - I think it is a bandaid. See if you can get the in-tank pump from a Toyota Supra Turbo locally. If you can't LMK and I can send you one.

[amo]

going to ask about an external wlbro 255

thx mate
thx amo

[amo]

no worries looks like new fuel pump standard injectors for now though

thx for ur help mate

thx amo

[amo]

well up date

new intank fuel 255l and 750cc injectors are nearly in
just a few things left now
fingers crossed next week will be pickin it up mon so will try again for ace cafe lol sorry simon again

thx amo

[Kevin]

Ask TDI when its going on the dyno, so we can watch via their 'DynoCam'.

[NSXGOD]

Hi Amo -

1) the injectors are too big by a factor of almost 2 for 6PSI and your car will probably idle like crap.

2) The Walbro pumps are not any good, and it will fail, normally sooner rather than later.

Hopefully not when you have your foot to the floor....

Pls be very careful unless you like buying new motors.

[MattS]

Dear 'NSX God' / Dali Racing / Mark Johnson,

Now that you're back from the grave (or wherever else you disappeared with your customers' money) how about answering some of the criticism you are receiving on this forum?

You've taken money and not provided the goods. In the UK this is called 'Theft'.

Let's hear what you have to say.....

And before anyone shoots me down for my comments, bear in mind that Dali Racing is using this site and forum to promote his goods and services to members.

[amo]

ok update still prob with injectors still not fittin
ordered the altinator pulley as it was missin from the same person i bought the kit off
should srrive tomorrow then be with tdi on fri

any 1 know if the jdm and the usa had diffrent size injectors as
stanard are 14mm and usa are 16mm at the inlet manifold end
nsx god would be great for ur input on this thx mate


so all in all
waitin for them to
injectors
fuel pump
pulley
mapping

thx amo

[amo]

ok looks like we nearly there

thx amo

[Rob_Fenn]

Why would you put an open filter in?

[amo]

ok update injectors in just the fuel pump todo thats on monday then start it up and dino

well thats the new fuel pump lol


and im going to pick her up on sat

thx amo

[amo]

Why would you put an open filter in?


sorry mate u mean the hks 1 thats how it came with that kit

but i like it makes a nice hisss in noise as well

thx amo

[Lankstarr]

So Amo...

Did you pick her up OK?

What power is she pushing?

Everything still working alright?

Are you having fun?

Was it worth it (honestly now!)?

What's next?

UPDATE UPDATE UPDATE!¬!!!!

L*

[simonprelude]

Think that's this Saturday, 7th :(


So Amo...

[amo]

ok update cos of the bank hols slight delay in me pickin it up
its on the dino today live webcam
on the tdi site
any time 12 onwards

http://www.tdi-plc.com/index.php?pge=C_dynocam

well i cant wait lol

pick it up wed
thx amo

[Rob_Fenn]

That's quite a reasonable turnaround time! I suppose you'll be too busy having fun to post any finished pictures up ;)

Enjoy it!

[amo]

ok a few more pics

and well will get the dino sheet up asap

runnin at 0.3 BAR

THATS RIGHT 0.3 BAR MAKING JUST UNDER 400 BHP AT THE FLY

WHHOOOOOOOOHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOO

[amo]

More Pics Lol

[amo]

1 More Lol

[NSXGB]

Amo....are you selling your engine cover? ;) (as it looks like your inlet/plenum sits too high for it).....might be tempted to take it off your hands if you are.

[Rob_Fenn]

Looks cool!

[Senninha]

Amo....are you selling your engine cover? ;) (as it looks like your inlet/plenum sits too high for it).....might be tempted to take it off your hands if you are.
WIll it include the old table leg too?? ;)

[simonprelude]

As you can see on the first photo of the 08:40pm post it already has a hole cut in it for the intake :( Don't think he will be selling it.


Amo....are you selling your engine cover? ;) (as it looks like your inlet/plenum sits too high for it).....might be tempted to take it off your hands if you are.

[Kevin]

Plenum:rolleyes:

Chargecooler intake.

[type_r_lover]

ok a few more pics

and well will get the dino sheet up asap

runnin at .082 BAR

THATS RIGHT .082 BAR MAKING JUST UNDER 400 BHP AT THE FLY

WHHOOOOOOOOHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO OOO

nice figure!

Looking forward to the dino sheet!

[Kevin]

.082 bar? You sure?

Thats like 1.2psi.

That doesn't add up.

[Papalazarou]

.082 bar? You sure?

Thats like 1.2psi.

That doesn't add up.

More likely .82 bar. which is just over 12 psi. Seems like quite a lot for a standard engine, but I know nothing.

Cheers,

James.

P.s, isn't this a dino?

[type_r_lover]

Papalazarou, nice dino...


on the TDI forum they said the car runs 0.3 bar at the moment... which seems more realistic.

Anyway his car must be pretty fun and wild to drive now...

[TheSebringOne]

Or how about this !!

http://www.fresh99.com/fred-flintstone-car.htm

Those wheels must be stiffest available & its a targa too! ;)

[reg]

Sorry to divert but Wilma or Betty ;)

[TheSebringOne]

Betty if shes the blonde one :D Wilma voice would give me migrane ! :(

[Senninha]

Betty if shes the blonde one :D Wilma voice would give me migrane ! :(
Agree ref the voice of Wilma, and Betty has black hair .........

[TheSebringOne]

Forget Wilma, Betty got jet black hair uuummmm, I take the car as you get that wind in your hair feeling like your targa ! but not sure you can go fast enough under your own steam as those roller wheelers looked heavy !;)

[mutley]

Betty or Wilma Hmmmmmmmmmmmmmmmm, oops side tracked!! Anyway I am really looking forward to seeing this monster running, and to wonder what it'll sound like.

Amo, any more performance figures??

[DAVEMAT]

Betty AND Wilma

[amo]

hi every1 just got bsck to wales lol
had a blast
sorry correct figs
0.3 bar

got all the pics and dino so will get them up as soon as p

well went for a run yest though london and it was dam sweet

ppl shoutin look at that lambo

then a bloke says its a fffffrrrraarrriiiiii lol

ppl takin pics every where and i got stoped in a road where all the bikers hang out dont know wot its called lol

cos they wanted to take pics

and dam its a lot quicker and louder luv it

thx amo